This article is all about the steps to stop aircon vibration to enhance its lifespan. Aircon is an essential home appliance in the hot weather of Singapore. However, like any other appliance, it can malfunction. When an aircon starts vibrating, it can be quite a headache for the homeowners. There can be multiple reasons for a vibrating aircon, and homeowners must be aware of them. In this article, we will discuss the seven easy steps to stop the vibrations of an aircon during its operation.
How to Stop Aircon Vibration in Singapore?
AC vibrations can be frustrating, but the good news is that they often require simple solutions. Different reasons cause aircon vibrations; identifying and resolving these issues will stop the vibrations. This section describes the essential tools needed to deal with aircon vibrations.
Tools and Materials Needed
The first step in any maintenance task is to gather the essential tools and materials. Here is a list of the tools and materials required to stop the aircon from vibrating.
- Screwdriver
- Adjustable wrench
- Level
- Rubber or foam pads
- Vacuum cleaner with a brush attachment
- Soft brush or cloth
- Zip ties or clamps
Step-by-Step Guide to Stop Aircon Vibrations
LS Aircon Servicing Singapore is an aircon gas top-up, general services, and aircon repair. It designs a step-by-step process to stop aircon vibration.
Step 1: Turn Off the Power
Disconnect any electrical appliance from the supply mains whenever you work on any electrical appliance. Turn off the breaker that controls the power flow to the aircon and save yourself from an unfortunate electric shock injury.
Step 2: Inspect and Tighten Loose Parts
Sometimes, loose parts within the aircon cause it to vibrate. Tighten all the screws, nuts, and bolts to ensure there is no loose screw or nut. Inspect the mounting brackets, fan blades, and the compressor for loosing. If you find any component that needs tightening, tighten it there and then.
Step 3: Check the Level of the Unit
An unbalanced air conditioner can vibrate excessively. Use a level to check if your aircon unit is properly balanced. If it’s not, adjust the unit’s position until it is level. You may need to adjust the legs of the unit or place rubber pads underneath to balance its position.
Step 4: Clean the Unit
Dust particles can accumulate in your aircon and cause imbalances and vibration. Use a vacuum cleaner with a brush attached to it to clean the exterior and interior of the unit. Pay special attention to the fan blades and coils because the debris here can cause the unit to vibrate. You can also use a cloth to remove stubborn dirt. Keeping your aircon clean reduces vibration and improves its efficiency.
Step 5: Install Anti-Vibration Pads
Anti-vibration pads are an effective solution to reduce noise and vibration. They can be placed under the aircon to absorb the vibrations. You can purchase rubber or foam pads that are particularly designed for this purpose. Lift the aircon slightly and slide the pads underneath. Ensure they are balanced to provide maximum stability.
Step 6: Secure Loose Wires and Tubes
Loose wires and tubes inside the aircon unit can be another possible reason for aircon vibration and noise. Inspect the unit for loose components and secure them with zip ties or clamps. This step reduces vibration and prevents potential damage to the wires and tubes. Ensure that the wires and tubes do not touch the fan blades or any other moving parts.
Step 7: Check the Fan Blades and Motor
The fan blades and motor are critical components of the aircon. If the fan blades are bent or damaged, they can cause aircon vibration.
- Check the blades for any signs of damage and straighten or replace them if necessary.
- Inspect the motor mounts and bearings. If the motor is not securely mounted or the bearings are worn out, the air conditioner can vibrate. In such cases, you may need to replace the motor mounts or bearings.
Conclusion
Stopping aircon vibration might seem challenging at first, but the steps explained above make it a straightforward process. These steps address the core reasons behind a vibrating aircon and the possible solutions to those issues. If the problem persists, enlist professional assistance to avoid further inconvenience.