It is not a difficult task to install a ductless mini split aircon, which is a cooling system that works without air ducts. It has two main units. One is an indoor unit that blows cool air inside the room. The other is an outdoor unit that removes heat from the home and ejects it outside.
Many people in Singapore choose a ductless mini split aircon because it is energy efficient and easy to install. You can also use it for one room without affecting the rest of the home. If you plan to install one, it is important to follow the right steps. This guide will help you understand how to do it in the simplest way.
How to Install a Ductless Mini Split Aircon in Singapore?
Ductless mini split aircon installation Singapore is a popular idea to combat Singapore’s heat and humidity. The installation process is not so tricky, but it needs the right steps to be followed.
LS Aircon Servicing Singapore is a well-known service provider in Singapore and explains the complete process to install a ductless mini split air conditioner in Singapore. Here is how you can do it:
Step 1: Choose the Right Location
Before you start, you must choose the best place for the indoor and outdoor units. The indoor unit should be on a wall where the air can flow freely. It should not be blocked by furniture. The height should be enough so the air can spread well.
The outdoor unit should be in a spot with good airflow. It should be on a flat surface to reduce vibration. Avoid places with direct sunlight, as it can affect performance.
Step 2: Gather the Tools and Materials
You will need basic tools like a drill, screwdriver, and measuring tape. You also need mounting brackets, screws, and a hole saw. The mini split aircon comes with copper tubing, a drain hose, and electrical wires. Make sure you have all these necessary tools and equipment before you start. Having everything ready will make the work smooth.
Step 3: Install the Indoor Unit
First, mark the position for the mounting plate on the wall. Use a level to ensure it is straight. Drill holes and fix the plate with screws. Once the plate is in place, you will need to make a hole in the wall for the pipes and wires.
The hole should slope slightly downward toward the outside to allow water to drain. Feed the pipes, drain hose, and cables through the hole. Now, hang the indoor unit on the plate.
Step 4: Install the Outdoor Unit
Before installing a ductless mini split aircon, place the outdoor unit on a stable base. This can be a concrete pad or a strong metal frame. Use bolts to keep it balanced. Connect the copper pipes from the indoor unit to the outdoor unit.
Tighten them with a wrench and connect the drain hose so water from the indoor unit can flow out. Then, connect the electrical cables following the wiring diagram in the manual.
Step 5: Vacuum the Lines and Test for Leaks
When you install a ductless mini split aircon, it is important to remove air and moisture from the copper pipes. You can also use a vacuum pump for this task. When complete, check for leaks in the connections. This step is vital because leaks can affect cooling and waste energy. If you find a leak, tighten the joint until it stops.
Step 6: Connect to Power and Test the System
After the pipes and cables are ready, connect the system to the power supply. Make sure the voltage matches the aircon requirements. Turn on the system and set it to cool mode. Afterward, check if the indoor unit is blowing cold air. Also, check the outdoor unit to see if it runs smoothly. It is also important to listen for unusual sounds that may show a loose part.
Step 7: Final Touches and Safety Checks
Once you are sure the system works well, secure all covers and fittings. Seal the hole in the wall with foam and putty to keep out insects and moisture. Moreover, when you install a ductless mini split AC unit, clean the work area and remove any tools or packaging.
Keep the user manual for future reference. Check that the remote control works and that you can adjust the temperature as needed.
Safety Tips
Installing a ductless mini split aircon involves electrical and refrigerant work. If you are not confident, it is better to hire a trained technician like LS Aircon Servicing Singapore, an expert in aircon installation, aircon relocation, and aircon repair services. This will ensure the job is safe and correct. Never skip the leak test and always turn off the power before working on any electrical connection.
Conclusion
In conclusion, if you want to install a ductless mini split aircon in Singapore, the above-mentioned process is the ultimate guide. You must choose the right location, prepare your tools, and follow each step carefully. Always test the system before regular use. This will help you enjoy cool air without problems.
A well-installed aircon will run efficiently and last for many years. If you are unsure about any step, getting professional help is the safest choice. By doing it right from the start, you can enjoy comfort and peace of mind in your home.
