Insulation for aircon pipe is a necessity in Singapore’s hot weather. Singapore has hot and wet weather most of the year. Many people use aircon in homes and offices to stay cool. The aircon has pipes that carry cold gas. These pipes must remain cold. If not, the system cannot cool the air well.
Therefore, you need proper insulation to keep it at a moderate temperature rather than being too hot. Too much temperature is not good for the refrigerant. Thus, this article will explain how to insulate the aircon pipe properly to avoid too much heat on it.
Why Pipe Insulation Is Needed?
The pipes can get warm from outside heat. This makes water form on the pipe. Water can drip and cause damage. Good insulation stops this phenomenon and keeps the pipe cold and dry. The pipe carrying refrigerant should be insulated to avoid heating it and disrupting the cooling process.
Why Does the Right Insulation for Aircon Pipe Matter?
Insulation of the aircon pipe is important for several reasons. LS Aircon Servicing Singapore explains some of the key reasons in addition to their aircon installation, aircon repair, and aircon chemical overhaul services in Singapore. Let’s go through the following reasons that depict the aircon pipe insulation’s importance in Singapore.
Keeps Cold Inside the Pipe
The pipe must stay cold. When heat from the air touches the pipe, the gas inside gets warm. Then the aircon works harder to cool the room. Insulation blocks the outside heat and helps the gas stay cold.
Stops Water From Forming
When hot air meets the cold pipe, water starts to form. This is called condensation. It can drip on walls or floors. Insulation keeps the outside air away from the pipe, so no water forms and the issues due to condensation are avoided.
Saves Power and Money
If the pipe stays cold, the aircon does not use much power. This means lower bills. It also means the aircon lasts longer and its parts are less stressed. Therefore, good insulation is better in the long run.
How to Choose the Insulation for Aircon Pipe?
To choose the right insulation for an air conditioner pipe, you need to know about the different types of pipes and their pros and cons. With this information, you can select the right one for your requirements. Let’s scroll through the types of insulation for AC pipes in Singapore.
Types of Pipe Insulation
Rubber Foam Insulation
This is the most common type in Singapore. It is soft and bends around the pipe easily. It blocks heat well. Many people use it for both homes and offices.
Polyethylene Foam
This type is light and low in cost. But it usually does not last long in hot places. It can break and wear out quickly as compared to its counterparts. It is not the best choice for the Singapore heat.
Insulation With Extra Cover
Some insulation comes with a strong cover. This is good for pipes outside the house. The cover stops the sun and rain from breaking the foam. It also keeps animals from biting the pipe. Therefore, it is a better choice to use an insulator for the pipe.
What to Check Before You Buy?
Check the Pipe Size
The first thing you need to check is the pipe size. The insulation must fit the pipe well. If it is too loose, heat can enter. If it is too tight, it will not make a proper seal. Use a tape to check the pipe size first to ensure that the insulation is perfect for the pipe.
Check the Thickness
In Singapore, thick insulation works best. It blocks more heat and stops water from forming. Most people use insulation that is at least 10mm thick.
Check the Quality
Cheap foam cracks in a short time. This can cause leaks and water stains. Good foam costs more but lasts longer. It also works better in high heat and wet air.
Water and Heat Resistance
Water and heat resistance are the most essential features of an insulation material in Singapore’s weather conditions. Insulation must not break in wet air. It should also stay strong in high heat. Some products have special marks that show they can withstand heat and water. These are safe to use.
Who Should Install the Insulation?
Call a Trained Person
Do not try to fit the insulation if you do not know how to work with aircon pipes. A trained person will know the right size and how to seal it. This saves time and avoids mistakes. This is also crucial to ensure the safe working of your aircon unit.
Do Not Fix Hard Places Alone
Some pipes are high or behind walls. If you try to fix these alone, you may get hurt. Let a skilled person do this job. You can also call a friend or family member to help you with this.
Conclusion
In Singapore, a strong insulation for aircon pipe is suitable to withstand the heat and humidity. To keep it working well, the pipes must stay cold. Good insulation helps in many ways. It keeps heat out, stops water, and saves power. With the right insulation, your aircon will work better and last longer.
