This article explains the easy steps to clean furnace coils in Singapore. The efficiency of your furnace is crucial, especially in a climate like Singapore’s. One important component of your furnace is the coils. Over time, these coils can get dirty and their efficiency reduces. Cleaning and maintenance are necessary for your air conditioner furnace coil efficiency and extension of its lifespan. Therefore, this article explains the easy steps to clean furnace coils in Singapore.
How to Clean Furnace Coils in Singapore?
Furnace coils are an essential part of your heating and cooling system. They help transfer heat and cool air throughout your home. However, over time, dust and other particles can accumulate on the coils and reduce their efficiency. Dirty coils force your furnace to work harder. This increases the energy consumption and retardation of the system.
Regular cleaning of furnace coils ensures optimal performance, reduces energy costs, and extends the life of your furnace. However, aircon furnace coil cleaning requires a basic understanding of the system. Therefore, LS Aircon Servicing Singapore has come up with a guide to clean aircon furnace coils. Moreover, they also offer aircon relocation, aircon installation, and aircon chemical washing services.
Step 1: Turn Off the Power
Before you clean furnace coils, it’s important to turn off the power to your furnace. This is the most crucial safety step to prevent electrical accidents. Locate the power switch near your furnace and turn it off. If you cannot find it, turn off the circuit breaker that controls the furnace. Verify that the power is off before you proceed to the next step.
Step 2: Access the Coils
The next step is to access the furnace coils. Depending on your furnace model, you may need to remove a few screws to reach the coils. The coils are usually located behind the furnace’s blower motor or in the air handler. Once you find the coils, remove the access panels to expose them.
Step 3: Inspect the Coils
Now, take a moment to inspect them. Look for the signs of dirt and debris buildup. If the coils are significantly dirty, they’ll need a thorough cleaning. Also, check for any damage to the coils, such as bent fins. If you notice any damage, it’s best to contact a professional for repair or replacement.
Step 4: Use a Soft Brush to Remove Loose Dirt
Start the cleaning process with a soft brush to remove loose dirt and debris from the coils. Be careful as you brush the coils to avoid damaging the delicate fins. Brush in the direction of the fins to prevent bending them.
Step 5: Apply a Coil Cleaner
Once you’ve removed the loose dirt, it’s time to apply a coil cleaner. Coil cleaners are designed to dissolve stubborn dirt from furnace coils. You can purchase a coil cleaner from a hardware store. Follow the instructions on the cleaner’s label for professional results. Generally, you’ll need to spray the cleaner over the coils and let it sit for a few minutes to break down the dirt.
Step 6: Rinse the Coils
After you apply coil cleaner, rinse the coils thoroughly with water. You can use a spray bottle filled with water. Be careful not to use too much water pressure, as this can damage the coils. Rinse until all the cleaner and dirt have been properly cleaned.
Step 7: Reassemble and Restore Power
The final step is to reassemble your furnace and turn on the power. Carefully reattach all the removed parts of the access panels. Ensure that everything is securely in place before you turn the power back on. Once the power is restored, run your furnace to check that everything is working well.
Conclusion
In conclusion, you need to clean furnace coils every four months. If you ignore the cleaning and maintenance of your furnace, it can result in heavy maintenance costs and potential failure of the system. The above steps are sufficient to guide you in the cleaning process. So, take the time to clean your furnace coils and enjoy the benefits of a well-maintained system.
